Comfort-company Swing-Away Lateral Pads Manuel d'utilisateur télécharger pdf

Toll Free 800.564.9248

www.comfortcompany.com

509 South 22nd Ave Bozeman, MT 59718

IS-SWINGAWAYLATERALPADS

REV0413

Loosen bolts (A) using the provided 5mm Allen

wrench. Fasten the base end of the hardware to

the mounting bracket on the wheelchair in the

order shown above: (A) -> (B) -> (A) -> (C) ->(D) ->

(E) -> (F).

Loosen bolts (G) from lateral assembly (H) and

securely fasten once they have been properly

positioned using the slots on (I).

To adjust the orientation of the mounting

brackets (E and H), loosen but do not remove

bolts (J) using the 5mm Allen Wrench. Securely

tighten once mounting brackets are in position.

To swing away the lateral pad, press swing away

lever (K). Assembly will snap back into place

when returned to its original position.

PARTS INCLUDED:

1 - Swing Away Lateral Hardware Assembly (LT_-SF)

1 - 5mm Allen Wrench

1 - 5/32” Allen Wrench

SWING AWAY LATERAL PADS

NOTE: You can adjust the depth of the hardware by

sliding the bolt assembly along the slots shown in (E).

Toll Free 800.564.9248www.comfortcompany.com509 South 22nd Ave Bozeman, MT 59718IS-SWINGAWAYLATERALPADSREV0413Loosen bolts (A) using the provided 5mm

Pas de commentaire

Comfort-company Swing-Away Lateral Pads Manuel d'utilisateur